E12 Lamp Cap Gauge Screw Thread Gauge For Testing Contact Making

7006-27H-1
Name: Go gauge for caps on finished lamps

PURPOSE:

To check the maximum dimensions of the screw thread and dimenslon minimum of E12 cops
on finished lamps.
TESTING:

When the cap on finished lamps has been screwed into the gauge aa far as it will go, the
centre contact shall touch surface X. When the lamp is being removed from the gauge, at least two full
turns shall be required to disengng the threads.
This gauge should be uaed only in conjunction with the gauge specified on sheet 7006-27J.

7006-32-1
Gauge for finished lamps fitted with E12 caps for testing contact-making
PURPOSE: To check lamp dimensions particularly the combination of cap length and bulb shoulder shape,
for contact-making in n lampholder.
TESTING: The shnpe of the lamp, with regard to the fit in the lamphalder, is assumed to be correc
if the lamp can be pushed into the gauge until surface reaches aurface or projects beyond it

7006-28C-1
Not go gauge for caps on finished lamps
PURPOSE:

To check the minimum outside (mejor) diameter of the screw thread, dimension d, of E12 caps on
finished lampg.
TESTING:

When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost,
the centre contact shall not project beyond surface.
Only the mass of the gnuge itself, shall be used in the test.

7006-27J-1
Additional go gauge for caps on finished lamps
PURPOSE:

To check the maximum outaide (major) diameter, dimension d, of E12 caps on finiahed lamps.
TESTING:

The gauge shall pass over the threnda of the cap. The maximum force used shall not exceed 4.5N
This gauge should be used only in conjunction with the gauge specified on aheet 7006-27H.

Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory testing equipment. We are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Guangzhou Shice are designed and manufactured as per the requirements of IEC, EN, UL, VDE, BS, AS, ISO standards and etc.

Our main products are:

waterproof and dustproof (IP) environmental test equipment;

switch, plug, socket and coupler test equipment; mechanical strength impact test equipment;

material fire hazard test equipment, enclosure protection test probes;

household appliances safety test equipment;

wire and cable test equipment;

luminaires test equipment;

electric tools test equipment.

Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.